CD-115

Single 15 inch speaker

A diamond shaped built-in dual frequency single 10 inch full frequency speaker designed for use in clubs, high-end clubs, and entertainment rooms. A 44mm titanium composite diaphragm compressed tweeter unit and a direct 10 inch mid to low frequency unit were selected, combined with high-precision processing technology. The sound has a thick and atmospheric mid frequency and a delicate and clear high frequency. The composite diaphragm has both the sweetness of polyester fiber membrane and the magnificence and texture of metal membrane. It has excellent high-frequency response and can rotate 100 ° × 50 ° constant pointing high horn. The phase response is very smooth, thanks to its excellent horn design technology, box structure design technology, as well as frequency divider tuning and unit selection. During frequency divider tuning, precise calculations are made to fully consider changes in unit group delay phase and other factors, resulting in a perfect combination of acoustic frequency points.

Product Characteristics

■A diamond shaped built-in dual frequency single 10 inch full frequency speaker designed for use in clubs, high-end clubs, and entertainment rooms. A 44mm titanium composite diaphragm compressed tweeter unit and a direct 10 inch mid to low frequency unit were selected, combined with high-precision processing technology. The sound has a thick and atmospheric mid frequency and a delicate and clear high frequency. The composite diaphragm has both the sweetness of polyester fiber membrane and the magnificence and texture of metal membrane. It has excellent high-frequency response and can rotate 100 ° × 50 ° constant pointing high horn. The phase response is very smooth, thanks to its excellent horn design technology, box structure design technology, as well as frequency divider tuning and unit selection. During frequency divider tuning, precise calculations are made to fully consider changes in unit group delay phase and other factors, resulting in a perfect combination of acoustic frequency points. ■The special heat dissipation magnetic circuit design of the bass unit ensures good heat dissipation under continuous high power, and the relatively constant temperature reduces impedance drift, minimizing unit power compression. The specially strengthened paper pot has good transient and rigidity, reduces the segmentation movement and Intermodulation of the paper pot under high-power state, and makes the voice more pure and solid. ■Provide 16 M8 suspension points for fixed installation and angle adjustment in flow applications. And there is a 35mm bracket base at the bottom of the speaker. The box is composed of multiple layers of birch faced plywood, with a wear-resistant black dot paint surface. A handle embedded flush with the box is installed on both sides of the speaker for easy handling, and two parallel SPEAKON four core sockets on the rear wiring board are convenient for connection. The perforated iron mesh covered with sound permeable sponge in black protects the speaker unit.

Parameter

System type: Single 15′ Full Range Speaker;

Drivers: HF:1×3′(75mm voice coil),LF: 1×15′(75mm voice coil);
Frequency Response: 75Hz~20KHz;
Power(Rms/Program/Peak): 400W/800W/1600W;
Sensitivity: 96dB;
Impedance: 8Ω;
Maximum SPL: 122dB;
Directivity Angle: 60ºH×40ºV;
Speaker Input:NL4MP×2;
Product size(H×W×D): 695*450*450(mm);
Package size(H×W×D): 525*505*770(mm);
N.W: 23.5kg
G.W:26.5kg

Page Content Update Time:2024-05-09 09:31:22

The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.

+86.137 1088 0209