Each full frequency speaker of the VR series fully conforms to the principle of linear array. The selection of the spacing between the high-frequency Wavefront converters, units, and frequency dividing points are consistent with the theory of linear array. VR110P applies coaxial array technology to solve the problem of directional narrowing caused by interference between medium and high elements near the frequency division point of conventional linear arrays, and also solves the problem of acoustic image deviation. The application of the phase plug panel effectively solves the horizontal interference problem of the dual unit structure, and reduces the acoustic modulation from low frequency to high frequency caused by the Doppler effect
Product characteristics:
◆ The Wavefront conversion device with mature technology is used in the high frequency part, and the original Wavefront conversion device is further optimized to increase the upper limit frequency of high frequency, reduce distortion, and improve the sense of hearing.
The tweeter unit is composed of two composite diaphragms with a diameter of 44MM and a 1-inch throat neodymium magnetic compression driver. The diaphragms are processed with the latest technology, and the pure titanium diaphragm has excellent transient performance and stable continuous output power. Combining low distortion Myla edges for a more natural listening experience.
◆ Mid low frequency is a mid low frequency driver with a voice coil diameter of 75MM and a high output. It is loaded with the latest patented ACPD (Acoustic Correction Passive Driver) to improve the available output of the mid low frequency driver, increase sensitivity, improve sound pressure level and directionality, and increase the horizontal and vertical frequency division points of the speaker's bass drive unit.
◆ The improved pendant has a higher Factor of safety while reducing the weight of the box. It can suspend up to 16 speakers, and has a 7:1 Factor of safety. The various hanging installation methods greatly expand the use of speakers
Product parameters:
frequency response
65Hz-20kHz (± 3dB)/80Hz-20kHz (-10dB)
Pointing angle (H × V)
80 °& 120 ° × 15 °
Sensitivity (1W/1m)
HF: 109dB LF: 103dB
Maximum sound pressure level (1m)
HF: 127dB (continuous)/133dB (peak)
LF: 127dB (continuous)/133dB (peak)
Power (AES)
HF: 200W/LF: 500W
Rated impedance
HF: 8 Ω/LF: 16 Ω
Bass unit
1x10 "neodymium magnetic bass/75mm voice coil
Tweeter unit
2x1.75 "titanium composite film neodymium magnetic tweeter unit/44mm voice coil
Box Structure
Inverted phase
Wiring form
NEUTRIK NL4MP × 2 HF: 2+2- LF: 1+1-
Size (W × D × H)
five hundred × three hundred and fifty-five × 275mm
Net weight
20kg
Search
